top of page
EK VarioEngraver VE600
Razor-sharp engraving.
The EK VarioEngraver VE 600 is a high-quality engraving system: you can create your own signs on the engraving surface in no time at all and engrave them according to your wishes. Due to its simple operation and compact design, the engraving device is suitable for use in any office or workshop.
Funktionen
functions
ENGRAVING HEAD
High speed.
The high-frequency spindle used (speed up to 50,000 rpm) guarantees precise and clean engraving on different materials. The control of the high-frequency spindle is integrated directly into the engraving device.
DISPLAY OF ENGRAVING DEPTH
Always the right value.
The value of the set engraving depth is always visible at a glance in the digital display directly on the engraving head and can be adjusted at any time.
ENGRAVING TOOL STANDARDIZATION
Zero point easily set.
The device offers a convenient engraving tool standardization function for setting the engraving depth. This option sets the engraving tool to zero. This allows the engraving depth to be optimally set.
FIXATION PLATES
Large selection.
To ensure that the element you want to label does not slip, we have a wide range of fixing plates available, from DIN A3 size to individual signs measuring 15 x 15 mm. Changing the fixing plates is easy and can be done in a matter of seconds.
INTEGRATED VACUUM CLEANER CONNECTION
Free of engraving chips.
The integrated vacuum cleaner connection enables the use of the EK-TEAM VC 500 vacuum cleaner. In conjunction with an adapter set, it is also possible to use a standard vacuum cleaner without any problems.
Technische Daten
Technical data
EK VarioEngraver VE600 A3
EK VarioEngraver VE600 A4
XY unit
Dimensions
W=690 mm, D=480 mm, H=250 mm
W=470 mm, D=480 mm, H=250 mm
Weight
approx. 8 kg
approx. 7 kg
Maximum engraving area
469x296 mm
249x296 mm
engraving speed
max. 20 mm/s
data interface
USB Level 2.0
command language
based on HP-GL 7475A
data buffer
32 MB
Addressable resolution
0.01 mm
repeatability
0.05 mm
power supply
100 - 240 V AC 50 - 60 Hz
engraving spindle
speed
min. 5,000 revolutions/min, max. 50,000 revolutions/min
torque
6 Ncm
frequency
83-830 Hz
power consumption
max. 60 W
collets
shaft diameter 3 mm
concentricity with collet
0.03 mm
Weight
approx. 280 g
length
approx. 175 mm
bottom of page